Rethinking The Keel

Expertise and know-how available for all builders from Class Members

Moderators: admin, Kevin

Rethinking The Keel

Postby admin » Fri Sep 07, 2018 3:30 pm

Now, with the centerboard boat sailing, and seeing some other keel options, I'm thinking of building a second keel. I'll keep the bulb keel, but for convenience and more frequent use, I'd love to have a lighter keel with either encapsulated ballast or bolt-on ballast that I can slide in and out of the keel box without the bother of a bulb on the end.

I'm considering some different ideas and will put some drawings on this thread for discussion purposes.

Somewhere, either on Sailing Anarchy, or on here, or one the old i550 forum, there were some discussions of a ballasted bulb-less keel, but I can't seem to find them. Any links would be appreciated!
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: Rethinking The Keel

Postby Warren Nethercote » Sat Sep 08, 2018 1:37 am

Look at how the Gougeon's built 'Yellow Canary'. A time-lapse build is on their web site. They used a ballasted keel, but rather than a bulb they cast the ballast in the same airfoil section in the keel. This allowed full retraction for portaging in the everglades challenge. The same airfoil-shaped ballast could be used on a centreboard end, although a centreboard tackle or winch upgrade would be required.
Warren Nethercote
Boutilier's Pt, Nova Scotia
Build License 573
Build log: viewtopic.php?f=3&t=364
Warren Nethercote
 
Posts: 410
Joined: Sat Apr 25, 2015 2:11 am

Re: Rethinking The Keel

Postby Big_Dog » Sat Sep 08, 2018 2:25 am

Tim, Email the PNW group.
Jon
#36 – Still In the Dawg House
Columbia, SC - Lake Murray
Big_Dog
 
Posts: 63
Joined: Wed Apr 13, 2011 4:04 am
Location: Columbia, SC - Lake Murray

Re: Rethinking The Keel

Postby admin » Tue Sep 11, 2018 6:26 pm

Thanks, guys. I haven't really dug up much in terms of drawings and such. I'm thinking of something like this, using a laminate of douglas fir. I still have about 50 pounds of #6 shot left.

Ya think?

encapsulated keel.jpg
You do not have the required permissions to view the files attached to this post.
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: Rethinking The Keel

Postby Warren Nethercote » Wed Sep 12, 2018 9:34 pm

Way too complicated! :-)

Shape the foil and then use a hole saw to cut out a circular bit. Put something to close off one side of the hole and fill and fair it. Then sheath.
Warren Nethercote
Boutilier's Pt, Nova Scotia
Build License 573
Build log: viewtopic.php?f=3&t=364
Warren Nethercote
 
Posts: 410
Joined: Sat Apr 25, 2015 2:11 am

Re: Rethinking The Keel

Postby Warren Nethercote » Thu Sep 13, 2018 12:46 pm

Or ... use the tip of the keel as a plug to make a concrete or plaster mould and then pour a led tip that is foil shaped. Cut off the tip and fasten on the lead tip and sheath the whole thing.
Warren Nethercote
Boutilier's Pt, Nova Scotia
Build License 573
Build log: viewtopic.php?f=3&t=364
Warren Nethercote
 
Posts: 410
Joined: Sat Apr 25, 2015 2:11 am

Re: Rethinking The Keel

Postby admin » Thu Sep 13, 2018 11:23 pm

Yep, thought about your 2nd suggestion. I may end up doing that. My main objection was how to fasten it to the upper part of the keel, but I think I have an idea now.

I hate it when I get ideas.....sigh......
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: Rethinking The Keel

Postby admin » Wed Jan 02, 2019 6:20 pm

OK, here's the plan. Yesterday I ripped some douglas fir 4x4''s and will laminate these and build a foil. I'll ballast this thing one way or the other. Bottom line is: this is going to be a lighter, more user-friendly foil for light air (e.g., the usual sailing conditions on the Chesapeake) and I'll use two Group 27 batteries to add 130 pounds of internal righting moment, strapped in on each side of the keel box.

I use an electric trolling motor, and it'll be good to have a spare battery for motoring and nav lights after dusk. Keep ya posted -- I'm interesting in how this will affect stability...I doubt the boat will be self-righting, although perhaps. Feel free to chime in on that! :-)

Douglas T Fir.jpg
You do not have the required permissions to view the files attached to this post.
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: Rethinking The Keel

Postby Thomas » Thu Jan 03, 2019 1:32 pm

I have been sailing with a 23 lb centerboard for as long as I launched the boat ,all good as long as it blows 10 or below . The boat is fast in light air ,a lot faster then most boats really.
I added a code 0, 237 sq foot , furling , easy the way it is suppose to be . Sailing with an extra crew , meaning adding 180lb - 200 lb plus pound is a big plus. Never dipped the rails
Yet , even so a few times gust hit so hard I had to luff ,pinch right into the wind .
I planning to built another board or router into the one I got and add 40- 60 lb of lead but had little inspiration since I finished the boat . Adding reef is a better solution then lead ,it will only slow you down in light air .
http://sailnaway.blogspot.com/2014/04/a ... oject.html
http://www.bluestempaddler.com/sootyter ... s-mounted/
Let me know how its done .
You do not have the required permissions to view the files attached to this post.
Thomas
 
Posts: 51
Joined: Fri Feb 23, 2018 12:27 am

Re: Rethinking The Keel

Postby Thomas » Thu Jan 03, 2019 2:20 pm

New years day regatta wind 5-7 mph , 4.1 knots boat speed
You do not have the required permissions to view the files attached to this post.
Thomas
 
Posts: 51
Joined: Fri Feb 23, 2018 12:27 am

Re: Rethinking The Keel

Postby Tim Ford » Thu Jan 03, 2019 2:30 pm

Excellent info, Thomas, and thanks very much!

Those two links are brilliant and anything by the Gougeons is always good! I'm PSYCHED!
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: Rethinking The Keel

Postby admin » Fri Jan 04, 2019 4:26 pm

Anudder question: who built your Code Zero for you? (what loft?) I'm thinking along the same lines with a top-down furler. Raced on a friends tri with a top down furler and they are the shizz-nizzle!
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: Rethinking The Keel

Postby Thomas » Fri Jan 04, 2019 9:45 pm

Waters Sails
Joe Waters
tel 803 957.50 40
www.waterssails.net

Great guy , beautiful work .
Thomas
 
Posts: 51
Joined: Fri Feb 23, 2018 12:27 am

Re: Rethinking The Keel

Postby Tim Ford » Thu Feb 28, 2019 6:07 pm

Started the new keel lamination! Can't wait til the actual shaping process begins.

firkeel.jpg
You do not have the required permissions to view the files attached to this post.
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: Rethinking The Keel

Postby Thomas » Thu Feb 28, 2019 9:53 pm

Tim
Using the Naca 12 foil is very old concept . I used Naca 59 , or even go to Naca 60 ,
http://airfoiltools.com/airfoil/details?airfoil=e59-il , the yellow line .
Just a thought .
Thomas
Thomas
 
Posts: 51
Joined: Fri Feb 23, 2018 12:27 am

Re: Rethinking The Keel

Postby Thomas » Thu Feb 28, 2019 10:04 pm

Looking back at my old files I actully used Naca 65
http://airfoiltools.com/airfoil/details ... ca65210-il
Thomas
 
Posts: 51
Joined: Fri Feb 23, 2018 12:27 am

Re: Rethinking The Keel

Postby Tim Ford » Fri Mar 01, 2019 1:53 pm

Hmm....I'd consider a different foil shape if I hadn't already installed acetal guides already. I liked the 0012 due to it's lift/stall coefficients. The boat sailed well with that foil. That is, when I could get the damn thing all the way down...not to mention all the way back up :lol:

Thanks though!
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: Rethinking The Keel

Postby Tim Ford » Thu Mar 07, 2019 6:05 pm

A bit more progress on the "speed keel" -- can't wait to try this thing!

speedkeel3.jpg


speedkeel2.jpg
You do not have the required permissions to view the files attached to this post.
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: Rethinking The Keel

Postby micah202 » Mon Mar 25, 2019 4:35 pm

admin wrote:Now, with the centerboard boat sailing, and seeing some other keel options, I'm thinking of building a second keel. I'll keep the bulb keel, but for convenience and more frequent use, I'd love to have a lighter keel with either encapsulated ballast or bolt-on ballast that I can slide in and out of the keel box without the bother of a bulb on the end.

I'm considering some different ideas and will put some drawings on this thread for discussion purposes.

Somewhere, either on Sailing Anarchy, or on here, or one the old i550 forum, there were some discussions of a ballasted bulb-less keel, but I can't seem to find them. Any links would be appreciated!


....there was discussion of this idea on the SA thread.
There are manufacturers of hollow alloy finns for sportboats, these could be filled with lead castings or shot.
i550 #240 ''carbon offset'',vancouver,BC,Canadah
......please be surre to user a resperarator ,espectially doing largger areasa of epoxy.
.....utherrwise,yerulll endap takling uhnd rithing rike ah do--NAHT GUD,ehnytime
micah202
 
Posts: 390
Joined: Tue Jul 26, 2011 2:34 am
Location: vancouver BC

Re: Rethinking The Keel

Postby Marino » Mon Mar 25, 2019 7:20 pm

Tim, how much weight in lead will you be putting on? or nothing at all?
Marino Zorz
Toronto, Ontario
Build License 307
Build log: http://photos.app.goo.gl/M2m7Afvf2f8p35nz5
Marino
 
Posts: 174
Joined: Fri Jun 10, 2011 2:23 am
Location: Toronto, Ontario, Canada

Re: Rethinking The Keel

Postby Tim Ford » Mon Mar 25, 2019 10:48 pm

Hi Marino, I'm going to pour in a bunch of lead shot. I have 28 lbs left of #8 lead. Maybe another 10-15 pounds after that. The laminated keel weighs about 25-30 pounds as it is. So total weight between 55-70 pounds when I'm done. And another Group 27 in the slot
up by the mast step should be a lot of dead weight but I have no idea of what the RM (righting moment) will be.

Tell you one thing, first couple of sails will be in the LIght stuff....
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: Rethinking The Keel

Postby Marino » Tue Mar 26, 2019 4:40 pm

Hi Tim, thanks for replying back. Not knowing the wind conditions on the lake you sail, why not first try sailing only with the new keel design and see how that goes first?
Marino Zorz
Toronto, Ontario
Build License 307
Build log: http://photos.app.goo.gl/M2m7Afvf2f8p35nz5
Marino
 
Posts: 174
Joined: Fri Jun 10, 2011 2:23 am
Location: Toronto, Ontario, Canada

Re: Rethinking The Keel

Postby Tim Ford » Tue Mar 26, 2019 7:27 pm

Not sure I follow you: you mean try the redesign of the old keel? The one I stripped all the fiberglass off and shaved down a little? I may try it a bit later this summer, but the first few go-arounds will be with the new straight (bulb-less) keel.

The "lake" I sail on is 200 miles long and 30 miles wide at it's widest point, averages just 11' deep. It's really a swollen river valley (the Susquehanna) and it's regular name is The Chesapeake Bay :lol: :lol:
Tim Ford
 
Posts: 535
Joined: Sun Mar 27, 2011 1:25 am

Re: Rethinking The Keel

Postby Marino » Tue Mar 26, 2019 8:05 pm

The one you are pouring the lead into. Would be interesting to see how the boat performance and handles.
That's a BIG lake.
Marino Zorz
Toronto, Ontario
Build License 307
Build log: http://photos.app.goo.gl/M2m7Afvf2f8p35nz5
Marino
 
Posts: 174
Joined: Fri Jun 10, 2011 2:23 am
Location: Toronto, Ontario, Canada

Re: Rethinking The Keel

Postby micah202 » Tue Mar 26, 2019 8:09 pm

Yah, I don't think the keel weight comes into play at all, until the boat is laying on the side panel. Did that once, messing around between races.

...at that point, you may just wish to have some weight there. :?
You do not have the required permissions to view the files attached to this post.
i550 #240 ''carbon offset'',vancouver,BC,Canadah
......please be surre to user a resperarator ,espectially doing largger areasa of epoxy.
.....utherrwise,yerulll endap takling uhnd rithing rike ah do--NAHT GUD,ehnytime
micah202
 
Posts: 390
Joined: Tue Jul 26, 2011 2:34 am
Location: vancouver BC

Next

Return to Building an i550

Who is online

Users browsing this forum: No registered users and 2 guests

cron