Casting the bulb

Expertise and know-how available for all builders from Class Members

Moderators: admin, Kevin

Re: Casting the bulb

Postby cstay » Fri Feb 10, 2012 8:40 pm

Im having a hard time keeping people straight. I didnt realize who you were posting that. Your design is the one that i copied when i made my mold.
cstay
 
Posts: 48
Joined: Mon Sep 19, 2011 1:32 pm

Re: Casting the bulb

Postby Chad » Fri Feb 10, 2012 9:01 pm

I used "Knot Racing" in my blog and the other forum, based on an email address I had at the time, based on the boat I sold before starting this crazy i550 adventure. Sorry to cause the confusion- I could have planned ahead a little, knowing "the Knot" wasn't going to be relevant any longer after I signed up for the i550 experience...

npf07_starting.jpg
You do not have the required permissions to view the files attached to this post.
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Casting the bulb

Postby Chad » Tue Feb 14, 2012 2:37 am

Finally shipped the bulb plug today. Turns out boxes and post office hours are in short supply in this small town. The things you don't think of....
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Casting the bulb

Postby noemar » Tue Feb 14, 2012 2:48 pm

Thank you Chad,looking forward to making the concrete mold.
Noel
noemar
 
Posts: 140
Joined: Sun Apr 17, 2011 12:42 am
Location: New Bedfod,MA Buzzards Bay

Re: Casting the bulb

Postby Kevin » Tue Feb 14, 2012 4:30 pm

Chad wrote:Finally shipped the bulb plug today. Turns out boxes and post office hours are in short supply in this small town. The things you don't think of....


I know that in my wife's home town you can always find beer cases. But that's about it in the "free box" area. :-)

How excellent that the new class plug is now making it's way to new destinations. Maybe we should call it "the Beav" :-). Thanks Chad for creating the bulb.
Kevin McDaniel
i550 #074 - PipeDream
Kevin
 
Posts: 457
Joined: Fri Mar 25, 2011 7:11 pm
Location: Evanston, Il

Re: Casting the bulb

Postby admin » Tue Feb 14, 2012 5:21 pm

dammitt....now _I_ want a Beav!
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

Re: Casting the bulb

Postby M&S » Tue Feb 14, 2012 6:27 pm

Great bunch of posts. Clear, concise, has me thinking . A rarity.
T
M&S
 

Re: Casting the bulb

Postby Chad » Tue Feb 14, 2012 10:13 pm

We have these paper and cardboard recycling bins around town, run by an outfit that helps disabled folks. You feel like a prick if you just go and take a box, when it's their main source of income. So I waited until I had a load of paper and grabbed a box in trade. Sort of like making change from the collection plate at church? Yeah, that's probably not looked on too well either...

T: concise? Uh oh, not my plan at all. That's why I hid a rig discussion in a bulb thread. That's why folks are saying "beav" when they really mean pu... -well, let's not be too concise about that one either!
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Casting the bulb

Postby M&S » Fri Feb 17, 2012 10:06 pm

OK, Just how did they get "Beaver Cleaver" past the TV censors in the fifties?????
M&S
 

Re: Casting the bulb

Postby noemar » Wed Feb 22, 2012 4:58 am

Chad wrote:Finally shipped the bulb plug today. Turns out boxes and post office hours are in short supply in this small town. The things you don't think of....


Chad, I received the plug today,it looks great thanks. I will be having eye surgery On Thursday the 23rd so hopefully I will be able to cast my concrete mold this weekend or at least early next week. I will forward the plug to Phil who I think is next in line.
Thanks again.
Noel
noemar
 
Posts: 140
Joined: Sun Apr 17, 2011 12:42 am
Location: New Bedfod,MA Buzzards Bay

Re: Casting the bulb

Postby Chad » Wed Feb 22, 2012 5:13 am

Sounds good, Noel.

Good luck with the eyes!
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Casting the bulb

Postby M&S » Wed Feb 22, 2012 6:04 pm

Chad wrote:Sounds good, Noel.

Good luck with the eyes!


I second the well wishes.
t
M&S
 

Re: Casting the bulb

Postby noemar » Wed Feb 22, 2012 7:01 pm

Hopefully I will have cut out my frames the way they should have been. My improved eyesight will tell.
noemar
 
Posts: 140
Joined: Sun Apr 17, 2011 12:42 am
Location: New Bedfod,MA Buzzards Bay

Re: Casting the bulb

Postby ryderp » Fri Mar 09, 2012 5:33 pm

Noel,

I left a private message for you but didn't hear back. How is the bulb mold going? Any chance that you're going to forward the plug soon? If not, I'll probably have to build my own plug. The keel bulb is now on the critical path for my project. Let me know, so that I'll know what direction to go.

Phil
ryderp
 
Posts: 259
Joined: Thu Apr 28, 2011 3:54 pm

Re: Casting the bulb

Postby noemar » Sat Mar 10, 2012 2:32 am

Phil.
I poured the first half today and will pour the next tomorrow. Sorry for the delay but I have been having vision problems since my surgery. After drying out for a few days I will strip the forms and get the plug out to you.
noemar
 
Posts: 140
Joined: Sun Apr 17, 2011 12:42 am
Location: New Bedfod,MA Buzzards Bay

Re: Casting the bulb

Postby ryderp » Sat Mar 10, 2012 2:25 pm

Noel,

Thanks for the reply. That would be fine.

I hope that your pour is going well, and that your vision issues are going away.

Phil
ryderp
 
Posts: 259
Joined: Thu Apr 28, 2011 3:54 pm

Re: Casting the bulb

Postby noemar » Sat Mar 10, 2012 11:05 pm

Phil ,
Should be ready to ship out Wednesday.I will keep you informed.
Noel
noemar
 
Posts: 140
Joined: Sun Apr 17, 2011 12:42 am
Location: New Bedfod,MA Buzzards Bay

Re: Casting the bulb

Postby ryderp » Mon Mar 19, 2012 7:45 pm

The bulb plug showed up at my house today - it looks great. I'm planning on casting the mold in the next few days. Is there someone else out there who wants the plug after I'm done with it?

Of course, thanks are due to Chad for creating this fish and to Noel for forwarding it on to me.

Phil
ryderp
 
Posts: 259
Joined: Thu Apr 28, 2011 3:54 pm

Re: Casting the bulb

Postby Chad » Tue Mar 20, 2012 4:47 pm

I'll put a notice in the classified section.
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Casting the bulb

Postby ryderp » Sat Apr 21, 2012 2:48 pm

Bulb and plug.jpg


I cast the keel bulb the other day using a mold that I made from Chad's beaver tail bulb plug. I think that I worked to slowly and I have some layering in the cast and the top of the plug (actually the bottom since it was cast upside down) had some voids that needed to be filled with additional lead. This created a pretty rough surface that needed to be filled with fairing compound. Anyway the picture above shows the bulb with it's "father".
You do not have the required permissions to view the files attached to this post.
ryderp
 
Posts: 259
Joined: Thu Apr 28, 2011 3:54 pm

Re: Casting the bulb

Postby slowpoke » Sun Apr 22, 2012 9:15 pm

Looks good! Don't worry, I think most of us had to add a little fairing compound to get it smooth (me more than others)! One more step done!
Rocky Shelton
Slowpoke, #288
Tijuana, Mexico
slowpoke
 
Posts: 365
Joined: Fri Mar 25, 2011 8:36 pm
Location: Tijuana, Mexico

Re: Casting the bulb

Postby Kevin » Thu Apr 26, 2012 11:39 pm

Have no fear. That bulb looks totally awesome compared to what I started with fresh from the mold.
Kevin.
Kevin McDaniel
i550 #074 - PipeDream
Kevin
 
Posts: 457
Joined: Fri Mar 25, 2011 7:11 pm
Location: Evanston, Il

Re: Casting the bulb

Postby M&S » Sat Apr 28, 2012 4:58 pm

Just a reminder about burying the attachment bolts in the blade for both top and bottom bolts
For 3/8" or 9 mm bolts 8 inches is a safe minimum for two bolts. Overbore by 1/8" or 3 mm.
Wet out holes and then fill with colloidal silica or high strength filleting blend.
M&S
 

Re: Casting the bulb

Postby Chad » Tue Dec 18, 2012 4:11 pm

MkIII bulb.jpg


Anybody up for a version 3 bulb???
:roll:
You do not have the required permissions to view the files attached to this post.
Chad
 
Posts: 806
Joined: Fri Mar 25, 2011 7:28 pm
Location: N. E. MO

Re: Casting the bulb

Postby admin » Tue Dec 18, 2012 4:30 pm

whoa.
admin
Site Admin
 
Posts: 474
Joined: Fri Mar 25, 2011 4:17 pm

PreviousNext

Return to Building an i550

Who is online

Users browsing this forum: No registered users and 3 guests

cron